Preventing Frozen Pipes
Chicago winters can do a lot of damage on your home or property. It is important to take the proper precautions when the time comes to prevent all the damage you can. Frozen pipes are the culprit behind some of the worst winter-time water damages we see here at SERVPRO of Evanston. While extremely common, frozen pipers are also preventable. Our team at SERVPRO of Evanston has compiled some tips to help you prevent frozen pipes when winter comes. Below Consumer Reports listed some ways to help prevent your pipes from freezing and what you should do to minimize the damage if it does occur.
How to prevent frozen pipes
Some of the steps experts recommend may go against your better instincts of conserving water and heat, but the extra expense is nothing compared with a hefty repair bill. Here’s what to do:
- Keep garage doors closed, especially if there are water supply lines in the garage.
- Open kitchen and bathroom cabinet doors to allow warmer air to circulate around the plumbing, especially if your sinks are on an exterior wall. (If you have small children, be sure to remove any harmful cleaners and household chemicals.)
- Let the cold water drip from a faucet served by exposed pipes. Running water through the pipe—even at a trickle—helps prevent pipes from freezing.
- Keep the thermostat set to the same temperature during day and night. Again, during a cold snap is not the time to set back the thermostat at night to save a few bucks on your heating bill.
- If you plan to be away during cold weather, leave the heat on in your home, set to a temperature no lower than 55° F.
- For the long term, add insulation to attics, basements, and crawl spaces. Insulation will maintain higher temperatures in those areas. And to prevent drafts, seal cracks and openings around windows, doors, and at sill plates, where the house rests on its foundation.
What to do if frozen pipes occur
If you turn on a faucet and only a trickle comes out, you may well have a frozen pipe. If a pipe has broken, turn off the water at the main shutoff valve, which is usually at the water meter or where the mainline enters the house. If the water is still running and no pipes have burst, you can take the following steps. (Of course, if you suspect a more serious problem, call a plumber.)
- Turn on the faucet. As you heat the frozen pipe and the ice plug begins to melt, you want the water to be able to flow through. Running water through the pipe, as cold as it is, will help melt ice in the pipe.
- Apply heat to the section of pipe using an electric heating pad wrapped around the pipe, an electric hair dryer, or a portable space heater (kept away from flammable materials), or by wrapping pipes with towels soaked in hot water. As tempting as it may be, do not use a blowtorch, kerosene or propane heater, a charcoal stove, or any device with an open flame; the high heat can damage the pipes or even start a fire.
- Apply heat until full water pressure is restored. Check all other faucets in your home to see whether you have additional frozen pipes. If one pipe freezes, others may freeze, too.
And don't forget . . . you can always count on SERVPRO of Evanston for all your frozen pipe and water damage needs. Give us a call at 847-763-7010. We are here to help.